Laser-Scanned Measured Building Surveys

Every survey we produce is captured with a Leica 3D laser scanner: accurate plans, sections and elevations of the existing building, plus the point cloud behind them. Based in Lymington with an office in London, we survey across Hampshire, Dorset and nationwide.

Why a laser-scanned survey

  • A complete record of the building, not just the dimensions someone thought to take
  • Re-measure from the point cloud at any time without revisiting
  • No scaffold or access equipment for most elevations; roofs by drone
  • Occupied buildings surveyed without disruption
  • One firm from capture to drawings: no handoff between a survey company and a CAD bureau

Laser-scanned vs traditional measured survey

  Laser-scanned survey Traditional tape and disto survey
What is recorded Every visible surface, inside and out, as a point cloud The dimensions the surveyor chooses to take on the day
Accuracy Point cloud typically within 2 to 5 mm; drawings to an agreed tolerance, usually 10 mm Depends on the surveyor and how many measurements are taken
Time on site A single building is usually captured in a day Usually longer for the same detail, as each dimension is taken by hand
A dimension is missing later Measured from the point cloud at a desk Another site visit
Roofs and high elevations Scanned from the ground or captured by drone Often need ladders, scaffold or access equipment
What you receive DWG and PDF drawings, Revit or IFC models on request, and the point cloud in E57 or RCP 2D drawings

More detail in our article on 3D scanning vs traditional surveys.

Turnaround

A single building is usually captured in a day. Registration and QA follow within 48 hours. Drawings typically take 5 to 10 working days from capture. We quote per project; send us the address, the areas and what the survey is for and we will quote within one working day.

Recent surveys

portland lodge hotel dorset 3d scan point cloud interior cutaway
Point cloud cut-away of Portland Lodge, Dorset: every room captured in one survey

Measured building surveys

We produce every survey from Leica RTC360 laser scans, so every dimension traces back to a point cloud you can check.

We scan the whole building inside and out, then draw from the point cloud. Because the cloud records every surface, drawings are complete and can be re-measured later without a return visit.

  • Floor plans and reflected ceiling plans
  • Sections and elevations
  • Roof plans from drone capture
  • Area schedules (GIA and NIA) to RICS Property Measurement
  • Delivered in DWG and PDF, with the point cloud in E57 or RCP

Used for planning applications, lease plans, refurbishment and extension design, fit-out tenders, dilapidations and party wall work.

We survey across Hampshire and Dorset from Lymington, including Southampton, Portsmouth, Winchester, Bournemouth and Poole, the New Forest and Dorset, and carry out measured building surveys in London from our London office.

portland lodge hotel dorset 3d laser scan point cloud exterior
Portland Lodge, Dorset: registered point cloud used to produce the Revit model and 2D CAD survey

As-built and construction verification surveys

We scan at the stages that matter (slab, frame, pre-cover-up, completion), compare the point cloud against the design model and report deviations with colour-coded heat maps and tables. As project managers and contract administrators ourselves, we know which deviations affect the next trade, the payment certificate or the handover file.

  • Slab flatness and level checks before frame or fit-out
  • Steel frame and envelope position against the structural model
  • Services routes before ceilings close
  • Completion as-builts for O&M and the building safety record

Outputs: deviation report, as-built point cloud, updated Revit or IFC model where required.

Frequently asked questions

What is the difference between a measured building survey and a topographical survey?

A measured building survey records the building itself: plans, sections and elevations. A topographical survey records the land around it: levels, boundaries, trees and services. We provide both, the latter by drone photogrammetry.

Do I need a measured survey for a planning application?

Planning drawings must show the existing building accurately. A laser-scanned survey gives your architect true geometry, which avoids corrections after validation and disputes with neighbours over heights and distances.

What accuracy do I get?

Registered point clouds are typically within 2 to 5 mm; drawings are produced to the tolerance we agree with you, usually 10 mm for building surveys. The point cloud is supplied so any dimension can be checked.

Can you survey an occupied building?

Yes. Scanning is non-contact and quiet. We plan stations to avoid people in the data and can work out of hours.

How much does a measured building survey cost?

We quote per project based on floor area, complexity, the outputs you need and access. Send the address and a short brief and we will quote within one working day.

Do you produce as-built drawings?

Yes. As-built drawings (plans, sections, elevations and reflected ceiling plans) are the standard output of our measured building surveys, drawn from the laser-scan point cloud rather than taped or disto measurements, so they show the building as it actually stands rather than as it was designed. Where you need the as-built record in 3D, the same scan feeds our scan to BIM service to produce an as-built Revit or IFC model.

Is this a LiDAR survey?

Yes. Our terrestrial laser scanners (Leica RTC360 and BLK360) are LiDAR instruments. They capture millions of measured points to survey grade accuracy, and we add drone photogrammetry for roofs, facades and sites where a ground-based scanner cannot see.

Reach out to see how we can assist you

For expert advice and consultancy on your project, contact us today.