What do you need from us to quote?
Ideally:
- site address and any access constraints
- areas to be scanned/modelled (and any exclusions)
- intended model use (coordination / refurb planning / verification / drawings)
- required outputs (RVT / IFC / 2D drawings / point cloud formats)
- programme dates and any site restrictions
- any BIM standards you need us to follow
Can you work from an existing point cloud?
Often yes—provided it’s complete for the required areas and suitable quality. We’ll review what you have and confirm suitability before committing.
What affects timescales?
Key drivers are size/complexity, access, required scope (what’s being modelled), and the level of detail. Targeted modelling of high-risk zones can often deliver value faster than modelling everything.
What file formats do you deliver?
Commonly RVT and IFC plus point cloud formats such as RCP/RCS or E57 (as agreed). If you have a preferred workflow, tell us at enquiry stage and we’ll align the outputs.
Do you model MEP?
We can, but MEP scope should be defined carefully (e.g., primary routes only vs detailed plant/containment). The right approach depends on how you intend to coordinate.
Is scan to BIM the same as an as-built survey?
They overlap. An as-built survey records a building as it actually stands, usually as 2D as-built drawings (plans, sections and elevations). Scan to BIM takes the same LiDAR point cloud and builds a 3D as-built Revit or IFC model from it, so you get the as-built record and a BIM model that design teams can work in directly. If you only need as-built drawings, our measured building survey service is the quicker option; if the building is going into a BIM workflow, scan to BIM gives you both.
Do you use LiDAR?
Yes. Our terrestrial laser scanners (Leica RTC360 and BLK360) are LiDAR instruments, capturing millions of measured points per second to survey grade accuracy. For roofs, facades and sites we add drone photogrammetry where it helps.